New Incas
The built-in water tap
NEW INCAS built-in full bore ball valve for hot / cold water.
¾ "male / male, female / female, Euroconus UNI ISO228 / 1
Connections suitable for any type of straight or curved fitting (copper, iron or multilayer pipe).
The ball is coated with Teflon to ensure smooth opening of the valve over time even in the case of calcareous or aggressive water.
The clearly visible and inspectable valves can be replaced without cracking.
Quick installation thanks to the quick coupling.
The compact shell, only 53 mm deep, can be embedded in walls of reduced thickness.
The closing plate, the only visible element, has the classic dimensions of 8 x 12 cm, making the final result pleasing to the aesthetics of the house.
Material specification
|
COMPONENT |
MATERIAL |
DESCRIPTION |
||
|---|---|---|---|---|
| 1 | BALL VALVE | CW 617 UNI EN 12165 | FORGED | |
| 2 | INSPECTIONABLE SHELL | PLASTIC | FORGED | |
| 3 |
BALL |
CW 614 N UNI EN 12164 | MACHINED, CHROME PLATED | |
| 4 | BALL GASKETS | P.T.F.E. | PURE | |
| 5 | STEM | CW 614 N UNI EN 12164 | MACHINED | |
| 6 | O-RINGS | ELASTOMER | SUITABLE FOR USE WITH GAS EN549 | |
| 7 | LEVER HANDLE | PLASTIC | FORGED | |
| 8 | SCREW | 8G STEEL | ZINC-PLATED | |
| 9 | PLUG | PLASTIC | FORGED |
Characteristics
| CHARACTERISTICS |
Standard series, full bore, short threads. |
| END CONNECTIONS | Male/male, female/female and male/male euroconus, thread; compatible to any type of fittings: straight or curved (copper, iron and multilayer hose). Threaded ends UNI ISO 228/1 standard. |
| USES |
The NEW INCAS ball valves are designed for wall built-in installation and suitable for hot and cold water, air, hydrocarbons and non-aggressive fluids. |
| INSTALLATION | Quick installation with hooks on shell and screws (supplied). The hose protection sheaths must be inserted inside the shell. |
| WORKING PRESSURE | PN 30. |
| TEMPERATURE LIMITS | From -20°C to + 100°C. |
| NOTE | According to UNI EN 13828 in presence of water which could be aggressive for brass alloy, as agree with UNI EN ISO 6509 standard, is necessary the DZR brass alloy. The manufacture is available on request. |
