Slide 1
The Big 5 Dubai 26 - 29 Novembre 2018
Enolgas will attend The Big 5 Dubai held in Dubai World Trade Center.
Visit us: Hall 2 – Stand G45
read MORE >
Slide 1
Download our APP
New Eko Filter
Slide 1
ATOMIC
The newest series of ball valves.
Perfect tightness at low and high pressure. Long life with no maintenance.
discover ATOMIC >
Slide 3
ENOLGAS GROUP
A historic brand is constantly evolving.
For over 50 years Enolgas is a reference point for quality and safety in the world of plumbing components. discover ENOLGAS >
GAS
CHOOSE YOUR ITEM
LOCKING SYSTEM

CONNECTION

SHAPE

SIZE
THREAD
CERTIFICATE
GAS
WATER
MOTORISED
INDUSTRIAL

FLEXIBLE HOSES

Flexible hoses for fuel gas and water

C.0070

Male/male nipples for solar water and gas applications.

GO TO PRODUCT »
C.0071

Male/male nipples for solar water and gas applications.

GO TO PRODUCT »
H.0375

Kit of tools.

GO TO PRODUCT »
G.0360

Angled ball cock for fuel gas, female/female, with T-handle for flexible hose, nickel-plated.

GO TO PRODUCT »
G.0361

Angled ball cock for fuel gas, female/male, with T-handle for flexible pipe, nickel-plated.

GO TO PRODUCT »
G.0362

Angled ball cock for fuel gas, male/female, with T-handle for flexible hose, nickel-plated.

GO TO PRODUCT »
G.0363

Angled ball valve for fuel gas, male/male, with T-handle for flexible pipe, nickel-plated.

GO TO PRODUCT »
G.0275

Flexible hose in stainless steel with yellow plastic coat, female/female with 2 gaskets.

GO TO PRODUCT »
G.0276

Flexible hose in stainless steel with yellow plastic coat, female/male with 1 gasket.

GO TO PRODUCT »
G.0370

Flexible hose in stainless steel with yellow plastic coat, female/female with 2 rubber.

GO TO PRODUCT »
G.0371

Flexible hose in stainless steel with yellow plastic coat, female/male with 1 rubber.

GO TO PRODUCT »
G.0372

Flexible hose in stainless steel AISI 316.

GO TO PRODUCT »
H.0370

Flexible hose in AISI 316 stainless steel, female/female, with rubber gasket.

GO TO PRODUCT »
H.0371

Flexible hose in AISI 316 stainless steel, male/female, with rubber gasket.

GO TO PRODUCT »
H.0373

Corrugated 316 stainless steel coiled pipe, length 10 meters, DN 16 or DN 20.

GO TO PRODUCT »
G.0373

Flexible meter house for gas in coil in AISI 316.

GO TO PRODUCT »
H.0374

Corrugated 316 stainless steel coiled pipe, insulated, length 10 meters, DN 16 or DN 20.

GO TO PRODUCT »
H.0380

Cutter for coiled pipe.

GO TO PRODUCT »
H.0382

10 fittings kit for coiled pipe.

GO TO PRODUCT »
G.0382

10 fittings kit for coiled pipe.

GO TO PRODUCT »
H.0384

Tool for fixing the hose.

GO TO PRODUCT »

CHARACTERISTICS FLEXIBLE HOSES

SAFETY FLEXIBLEGAS APPLIANCES HOSEFOR USE WITH DOMESTIC

INSTRUCTIONS FOR INSTALLATION AND USE
1 - Verify that the hose length is suitable for connection between the valve and the appliance (hob, oven, kitchen, boiler, etc.) taking care not to exceed the maximum length allowed indicated on one of the fittings.
2 - Perform the assembly of the fitting to the valve, by taping the fitting thread with a P.T.F.E. tape or other material allowed by the current standards, screwing it in by hand without tightening (if it is a cock with female end) or, after fixing the enclosed gasket in the suitable seat of the female fitting, screw the revolving nut in by hand (if it is a gas cock with male end). Connect the other fitting to the appliance in the same way.
3 - Place the appliance definitely, checking that the hose does not bear torsional stress, then tightness both fittings with a hexagon wrench.
4 - Perform the tightness check of the fittings as follows: a) sprinkle the fittings with water and neutral soap; b) open the gas cock; c) if there are no bubbles the fittings are tight; if on the other hand there are bubbles verify that the gaskets are not damaged, tightness the fittings again, repeat the check in the same way until there are no bubbles.


WARNINGS
If necessary the installer must effect earthing respecting current norms. This kit is suitable to connect appliances with a nominal thermal capacity not exceeding 35 KW.
The hose installation must be performed only by qualified personnel in observance of all current norms and procedures. Especially do not install the flexible hose if there is any doubt about the compatibility of its connections to the gas appliance or the gas supplying system. Do not use adapters to make the connections compatible. Do not install the hose upstream the pressure reducing valve. Ensure that the flexible hose allows a suitable flow for the use which it is destined for.
Install the hose in conformity with the local and national standards and with the best customary practise.
Follow the instructions for installation given by both the hose manufacturer and the appliance manufacturer. The connection between two flexible hoses is not allowed. Do not have the flexible hose undergo a bending radius inferior to the minimum allowed. The deterioration or destruction of any part of this assembly makes it necessary to change the whole kit; modifications made to any piece of the assembly makes it no more in conformity with the European standard. It is appropriate to avoid any torsional stress to the flexible hose.
Do not place the hose in areas with temperatures exceeding 60°C. Assembly, disassembly or improper uses of the ENOLGAS flexible hose render the manufacturing company guarantee void. For assembly please refer only to qualified installers.
To clean the ENOLGAS flexible hose use only neutral and inert detergents and non abrasive tools. The ENOLGAS hose does not need maintenance.

MATERIAL SPECIFICATIONS FLEXIBLE HOSES



Missing documents