Swift O Matic Iso Top
Ball valve standard series with actuator
The S · O · M ISO-TOP series represents the excellent compromise between a professional valve and the high value for money. Thanks to the ISO 5211 flange, full compatibility with standard actuators on the market is guaranteed. The reduced manoeuvring torque allows a substantial reduction in the choice of electric and pneumatic motors. This advantage takes the form of significant cost savings for the entire valve package plus actuator.
These valves are suitable for applications with hot and cold water, air, hydrocarbons in general and non-aggressive fluids.
The valve is available in sizes from ½ ”to 3” Female / Female.
Material specification
COMPONENT | MATERIAL | DESCRIPTION | ||
|---|---|---|---|---|
1 | BODY | CW 617 N UNI EN 12165 | FORGED, NICKEL-PLATED | |
2 | END ADAPTER | CW 617 N UNI EN 12165 | FORGED, NICKEL-PLATED | |
3 | BALL | CW 614 N UNI EN 12165 | MACHINED, CHROME-PLATED | |
4 | BALL GASKETS | P.T.F.E. | VARIOUS | |
5 | STEM | CW 614 N UNI EN 12164 | MACHINED, NICKEL-PLATED | |
6 | THRUST WASHER | P.T.F.E. | PURE | |
7 | O-RINGS | ELASTOMER | - |
SIZE | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2" | 2"1/2 | 3" | |
DN (mm) | 8 | 10 | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | |
PN (bar) | 40 | 40 | 40 | 40 | 40 | 40 | 25 | 25 | 25 | 16 | |
Kv (with water) | 5,9 | 9,4 | 17 | 41 | 70 | 121 | 200 | 292 | 535 | 850 | |
MAX BREAKING TORQUE (Nm) | PN Ø | 6 | 6 | 6 | 7 | 10 | 12 | 13 | 15 | 35 | 40 |
The above mentioned values are indicative (statistic average) and refer to a valve new, as released by ENOLGAS after seven days standstill, at the temperature of 25°. Please consider eventual safety margin in case you might use the valve with different actuators.
Characteristics
FEATURES AND STANDARDS | SWIFT O MATIC ISO•TOP valves are in brass, heavy and appositely designed to be easily and quickly automated by actuators. Full bore. Connections to actuators according to ISO 5211. Threaded ends: UNI EN 10226 – NPT. ISO 228–BSPT on request. 2014/68/UE – H FORM. Available with ball gaskets in carbographite for approximately 100.000 cycles of maneuver. |
APPLICATION LIMITS | Temperature: |
MAIN APPLICATIONS | Hot and cold water, air, hydrocarbons in general and non-aggressive fluids. |
CONNECTION WITH ACTUATORS | The connection between valve and actuator is extremely stable: stem, square and ISO 5211 flange. |
ADVANTAGES AND COMPETITIVENESS | The mechanical features of SWIFT O MATIC ISO•TOP provide the automated valve with appreciable advantages. The reduced operating torque allows an extreme reduction in the choice of electrical or pneumatic actuators.This advantage turns into a significant saving as far as the cost for the whole package valve + actuator is concerned. |
NOTE | According to UNI EN 13828 in presence of water which could be aggressive for brass alloy, as agree with UNI EN ISO 6509 standard, is necessary the DZR brass alloy. |
Pressure/temperature diagram
(tested with water)
