TENAX WP
Industrial ball valves with ISO base
It takes up the TENAX series, but adding an ISO base for mounting pneumatic and electric actuators
according to the ISO5211 standard (through a specific mounting kit that can be purchased separately).
Watch the video on industrial valves TENAX
Material specification
COMPONENTS | MATERIALS | ||
|---|---|---|---|
1 | BODY | AISI 316 D 1.4408 | |
2 | BALL | AISI 316 D 1.4408 | |
3 | BALL SEATS | PTFE | |
4 | THRUST WASHER | PTFE | |
5 | PACKING WASHERS | AISI 304 D 1.4301 | |
6 | SPRING WASHERS | AISI 301 D 1.4310 | |
7 | FIXING-NUT-PLAT | AISI 304 D 1.4301 | |
8 | LOCKING NUT | AISI 304 D 1.4301 | |
9 | LEVER HANDLE | AISI 304 D 1.4301 | |
10 | STEM RETAINING-NUT | AISI 304 D 1.4301 | |
11 | OPERATION-STOP | AISI 304 D 1.4301 | |
12 | STEM PACKING | PTFE | |
13 | O-RING | FLUOROELASTOMER | |
14 | STATIC GASKET | PTFE | |
15 | STEM | AISI 316 D 1.4401 | |
16 | END ADAPTER | AISI 316 D 1.4408 |
Characteristics
END CONNECTIONS | Female screwed to Rp UNI-ISO 7/1 (UNI EN 10226). |
WORKING PRESSURE | From PN100 (3/8”) to PN40 (2”). |
TEMPERATURE LIMITS | From -20°C to +150°C. |
SPECIAL EXECUTIONS | Special gaskets:
|
Breaking Torque in Nm
Values in Nm change depending on the application and material of the seats. Always consider a suitable safety factor.
Pressure/temperature diagram
