Enolgas Valvole Rubinetti Acqua Fittings Axo Pe Metal

Axo Pe Metal

Fitting for polyethylene pipe with metal components and O-rings

Axo Pe Metal guarantees extremely reliable performance. Among the main features: abundant guide depth of the pipe in the body, useful for obliquely cut pipes, double seal with locking by means of the pipe clamp cone and through an O-ring compressed by the special ring, extremely simple assembly and disassembly. The hose clamp cone and the O-ring press spacer are in brass CW 614 N UNI EN 12164.

Material specification

Approved to EN 1254

Enolgas Axo Pe Plastic caratteristiche

  

COMPONENT

MATERIAL

 1NUTCW 617 N UNI EN 12165
 2PIPE GRIP CONECW 614 N UNI EN 12164
 3THRUST RINGCW 614 N UNI EN 12164
 4O-RINGELASTOMER
 5PRESSURE CONE*CW 614 N UNI EN 12164
 6BODYCW 617 N UNI EN 12165

* OPTIONAL (on request)


Characteristics

ASSEMBLY INSTRUCTIONS

In order to assemble AXO PE METAL, carry out the following operations in the following priority:

  1. Cut the PE-pipe vertically, then trim flashes
  2. Put on the pipe, respectively: the nut (part 1), the pipe grip cone (part 2) and the thrust ring (part 3). Leave the o-ring (part 4) in the body.
  3. Insert the pressure cone (part 5)  into the pipe until it stops.
  4. Insert the pipe into the body (part 6) until it stops.
  5. Approach manually the single components (parts 3 and 2) to the body (part 6) and then approach and screw the nut (part 1) tight.
NOTEIn order to make the assembly easier, the pipeshouldn’t be excessively oval. According to UNI EN 13828 in presence of water which could be aggressive for brass alloy, as agree with UNI EN ISO 6509 standard, is necessary the DZR brass alloy. The manufacture is available on request.
AXO PEThe pipe grip cone and the thrust ring are in CW 614 N UNI EN 12164 brass.
FEATURESDeep guideway for the pipe in the body (part 6) which allows a proper housing of diagonally cut  pipes too. Perfect seal of the pipe thanks to the pipe grip cone (part 2) whose jaws grip the pipe firmly without breaking it. Extremely simple and quick assembly and disassembly by screwing and unscrewing the nut (part 1). Perfect tightness thanks to the o-ring (part 4) which adheres to the external diameter of the pipe. Accurate and solid design for high and reliable performances.
DOUBLE SEALThe seal of the fitting and the tightness of the pipe are obtained by means of two different elements.
The seal is guaranteed by a tapered gasket in elastomer.
The tightness of the pipe is instead assured by the pipe grip cone, whose jaws grip the pipe when the nut is screwed tight.
END CONNECTIONSEnds are ISO 228/1 threaded.
WORKING PRESSUREPN 16 max.(with water).
USESThe fittings are suitable for connecting the following types of polyethylene pipes:
Polyethylene type 312 high density UNI 7611-7615 (PN 2,5 – PN 4 – PN 6 – PN 10 – PN 16).
Polyethylene type 316 high density UNI ISO 4437.
Polyethylene type 312 low density UNI 7990-7991 (PN 4 – PN 6 – PN 10).
AXO PE fitting is recommended for use with water, air and inert gas.
IMPORTANT NOTEAXO PE fitting shall not be used for use with domestic fuel gas applications according to the standard UNI-CIG 7129 in Italy or others valid in your country. 
TEMPERATURE LIMITSFrom -20°C to +90°C

 

Enolgas Axo Pe Plastic caratteristiche

Pressure/temperature diagram

 

Download
Axo Pe Metal 1.02 MB
  • H.0330

    AXO PE METAL
    Straight fitting for PE-pipe, female, with inner components in brass, sandblasted.
    EAC
  • H.0331

    AXO PE METAL
    Straight fitting for PE-pipe, female/flanged, with inner components in brass, sandblasted.
    EAC
  • H.0332

    AXO PE METAL

    Straight fitting for PE-pipe, male, with inner components in brass, sandblasted.

    EAC
  • H.0333

    AXO PE METAL
    Straight fitting for PE-pipe, male/flanged, with inner components in brass, sandblasted.
    EAC
  • H.0334

    AXO PE METAL
    Straight double fitting for PE-pipe, with inner components in brass, sandblasted.
    EAC
  • H.0336

    AXO PE METAL
    Angled fitting for PE-pipe, female, with inner components in brass, sandblasted.
    EAC
  • H.0338

    AXO PE METAL
    Angled fitting for PE-pipe, male, with inner components in brass, sandblasted.
    EAC
  • H.0340

    AXO PE METAL
    Angled double fitting for PE-pipe, with inner components in brass, sandblasted.
    EAC
  • H.0342

    AXO PE METAL
    T-fitting for PE-pipe, female, with inner components in brass, sandblasted.
    EAC
  • H.0346

    AXO PE METAL
    T-fitting for PE-pipe, with inner components in brass, sandblasted.
    EAC
  • H.0347

    AXO PE METAL
    Plug for PE-pipe with inner brass components.
    EAC
  • H.0915

    AXO PE METAL
    Pressure cone.
    EAC