TENAX WP
Industrial valves with ISO base
It takes up the TENAX series, but adding an ISO base for mounting pneumatic and electric actuators
according to the ISO5211 standard (through a specific mounting kit that can be purchased separately).
Watch the video on industrial valves TENAX
Material specification
|
COMPONENTS |
MATERIALS |
||
|---|---|---|---|
| 1 | BODY | AISI 316 D 1.4408 | |
| 2 | BALL | AISI 316 D 1.4408 | |
| 3 | BALL SEATS | PTFE | |
| 4 | THRUST WASHER | PTFE | |
| 5 | PACKING WASHERS | AISI 304 D 1.4301 | |
| 6 | SPRING WASHERS | AISI 301 D 1.4310 | |
| 7 | FIXING-NUT-PLAT | AISI 304 D 1.4301 | |
| 8 | LOCKING NUT | AISI 304 D 1.4301 | |
| 9 | LEVER HANDLE | AISI 304 D 1.4301 | |
| 10 | STEM RETAINING-NUT | AISI 304 D 1.4301 | |
| 11 | OPERATION-STOP | AISI 304 D 1.4301 | |
| 12 | STEM PACKING | PTFE | |
| 13 | O-RING | FLUOROELASTOMER | |
| 14 | STATIC GASKET | PTFE | |
| 15 | STEM | AISI 316 D 1.4401 | |
| 16 | END ADAPTER | AISI 316 D 1.4408 |
Characteristics
| END CONNECTIONS | Female screwed to Rp UNI-ISO 7/1 (UNI EN 10226). Male screwed to Rp UNI-ISO 7/1 (UNI EN 10226). Others threads on request. |
| WORKING PRESSURE | From PN100 (3/8”) to PN40 (2”). |
| TEMPERATURE LIMITS | From -20°C to +150°C. |
| SPECIAL EXECUTIONS | Special gaskets:
|
Breaking Torque in Nm
Values in Nm change depending on the application and material of the seats. Always consider a suitable safety factor.
Pressure/temperature diagram
Download
TENAX WP 254.9 KB